School of Electrical and Computer Engineering

Jawad Faiz

School of Electrical & Computer Engineering

Professor

Email: jfaiz [AT] ut.ac.ir

Personal Website:

Research Interests

Design and modeling of electrical machines
Induction generators design
Switched reluctance machines design and modeling
Traction motor design and control for electric vehicle
DTC technique for induction and PM motors
Fault diagnosis of electrical machines
Slip recovery energy in induction motor
Estimation of losses in SRM
Electric field computation in power transformer
Solid-state tap-changer for distribution transformers
Linear induction motor and generator design and modeling

Courses

Electrical Machines, conventional and special machines.
Insulation Engineering.
Illumination Engineering.
Electrical energy distribution, Electrical materials.
Electrical Installations.
Fundamental of Electrical Engineering.
Generalized theory of electrical machines.
Design of electrical machines.
Advanced special electrical machines.
Numerical methods in electromagnetic.
Electrical materials for electrical engineering.

Selected Publications

1) Introduction of CAD of switched reluctance motors Finch, J.W, Faiz, J. and Harris, M.R. Proceedings of 22nd Universities Power Engineering Conference (UPEC-87), April 1987, Sunderland, UK., paper No. 8.01.

2) Permeance calculation for complex pole shapes by assumed flux paths Faiz, J., Metwally,H.M.B., Harris, M.R. Finch, J.W, Proceedings of 22nd Universities Power Engineering Conference (UPEC-87), April 1987, Sunderland, UK., paper No. 9.09.

3) Calculation of a switched reluctance motor performance using finite element method Metwally, H.M.B., Finch, J.W and Faiz, J. Proceedings of 23rd Universities Power Engineering Conference (UPEC-88), Sept. 1988, Nottingham, UK.

4) Simplified unaligned permeance evaluation of doubly salient structures and estimation of finite slot depth effect Faiz, J., Finch, J.W. and Metwally, H.M.B. Proceedings of 23rd Universities Power Engineering Conference (UPEC-88), Sept. 1988, Nottinghm,UK

5) The multi-tooth per stator pole switched reluctance motor Four teeth per pole Faiz, J., Finch, J.W. and Metwally, H.M.B. Proceedings of International conference of Electrical Machines (ICEM-88), Sept. 1988, Pisa. Italy, Volume II, pp 563-568.

6) Core loss in switched reluctance motor structures-Experimental results Metwally, H.M.B., Faiz, J. and Finch, J.W. Proceedings of International conference of Electrical Machines (ICEM-88), Sept. 1988, Pisa. Italy, Volume II, pp 31-34.

7) Two-dimensional flux leakage estimation in switched reluctance motors Faiz, J. and Finch, J.W. Proceedings of 4th International conference of Electrical Machines and Drives (EMD-89), Sept. 1989, London, UK, pp 317-321.

8) Estimation of shallow slot on the permeance of doubly salient structure

9) A non-linear modeling of a loaded transformer using design data.

10) CAD of single-phase induction motors based on a new geometrical approach

11) Two-dimensional finite element analysis of multi-tooth per stator switched reluctance motor- four teeth per stator pole Faiz, J., Harris, M.R. and Finch, J.W. Conference Record of 25th Annual Meeting of IEEE Industry Applications Society (IEEE/IAS), October 1990, Seattle, USA, pp 234-240.

12) Steady-state test for switched reluctance motors Faiz, J. Proceedings of China International Conference on Electrical Machines, Sep. 18-20, 1991, Wuhan, China. pp 454-459.

13) Comparison of switched reluctance motors with conventional motors Faiz, J. Proceedings of China International Conference on Electrical Machines, Sep. 18-20, 1991, Wuhan, China. pp 498-503.

14) Short circuit in three phase induction motors supplied balanced and unbalanced voltages Faiz, J. and Khodadadi M.A. Proceedings of China International Conference on Electrical Machines, Sep. 18-20, 1991, Wuhan, China. pp 621-626.

15) Heat distribution and thermal calculations for switched reluctance motors Faiz, J. and Dadgari, A. Proceedings of 5th International Conference on Electrical Machines and Drives, Sept. 1991, London, UK, pp 305-310.

16) Prediction of Static Magnetization Characteristics of switched reluctance motors for general

17) Brushless drives using multi-tooth per pole switched reluctance motors Finch, J.W., Metwally, H.M.B and Faiz, J. Proceedings of International Conference on the Evolution and Modern Aspects of Synchronous Machines, Aug. 27-29, 1991, Zurich, Switzerland, pp 469-474.

18) Computer modeling of a three phase induction generator for power system Jawad Faiz, K. Banan Abbasi and A. Roshan Milani Proceedings of the Second IASTED International Conference on Computer Applications in Industry, May 5-7, 1992, Alexandria, Egypt, pp 370-373.

19) Rewinding of a conventional induction motor as a switched reluctance motor Jawad Faiz, A.A. Khamenian and S. Ghasemzadeh Proceedings of the International Aegean Conference on Electrical Machines and Power Electronics, May 27-29, 1992, Kusadasi, Turkey, pp 61-66.

20) Electrical Machines Computer Package Based on Generalized Theory of Electrical Machines Jawad Faiz, M.A. Khadadadi Proceedings of the International Aegean Conference on Electrical Machines and Power Electronics, May 27-29, 1992, Kusadasi, Turkey, pp 618-623.

21) Modeling of a three phase induction generator connected to Electric Power System Jawad Faiz, K. Banan Abbasi and A. Roshan Milani Proceedings of the International Aegean Conference on Electrical Machines and Power Electronics, May 27-29, 1992, Kusadasi, Turkey, pp 353-359.

22) Engineering Education in Iranian Universities past and Present Jawad Faiz and Sayed Ghasemzadeh Proceedings of 5th World Conference on continuing Engineering Education, June 2-5, 1992, Helsinki University of Technology, Espoo, Finland, pp 197-204.

23) A design package for single-tooth per stator pole switched reluctance motors Faiz, J. and Finch, J.W. Proceedings of the International Conference on Electrical Drives and Power Electronics, September 14-16, 1992, Kosice, Czech and Slovak Federal Republic, pp. 87-92.

24) Software for Electrical machines laboratory Faiz, J. and Ghasemzadeh, S. Proceedings of the International Conference on Electrical Drives and Power Electronics, September 14-16, 1992, Kosice, Czech and Slovak Federal Republic, pp. 102-106.

25) Modification factor for sizing equation of electrical machines - Single and three phase induction motors Faiz, J. and Honarparvar, Sh. Proceedings of the International Conference on Electrical Drives and Power Electronics, September 14-16, 1992, Kosice, Czech and Slovak Federal Republic, pp. 345-347

26) Capacitance requirement for self-excited induction generator including core losses Faiz, J. and Khamnian, A.A. Proceedings of the International Conference on Electrical Drives and Power Electronics, September 14-16, 1992, Kosice, Czech and Slovak Federal Republic, pp. 354-358.

27) Design study of switched reluctance motor performance Finch, J.W., Faiz, J. and Metwally, H.M.B. Conference Record of 27th Annual Meeting of IEEE Industry Applications Society (IEEE/IAS), October 1992, Houston, Texas, USA.

28) Comparison of different power factor improvement techniques for induction generator performance Faiz, J. and Roshan Milani A. Proceedings of 11th International Conference on Electrical Drives and Power Electronics, October 1994, the High Tatras, Slovakia, pp. 194-198.

29) Simulation of a variable reluctance stepping motor for sinusoidal and step excitations Faiz, J. and Iranpour R. Proceedings of 11th International Conference on Electrical Drives and Power Electronics, October 1994, the High Tatras, Slovak, pp. 296-301.

30) A systematic design procedure for variable reluctance step motor based on permeance model Faiz, J. and Banan-Ali-Abasi K. Proceedings of 11th International Conference on Electrical Drives and Power Electronics, October 1994, the High Tatras, Slovak, pp. 361-366.

31) Comparison of two circuit models for simulation of a three phase squirrel-cage induction motor Sharifian, M.B.B and Faiz, J Proceedings of 11th International Conference on Electrical Drives and Power Electronics, October 1994, the High Tatras, Slovak, pp. 378-382.

32) Simulation of a capacitor single phase induction motor using two models Faiz, J and A. Servatian Proceedings of 11th International Conference on Electrical Drives and Power Electronics, October 1994, the High Tatras, Slovak, pp. 446-450.

33) Transient operation of transformers Faiz, J. and M.B.B. Sharifian Proceedings of 6th International Symposium of Electromagnetic Fields in Electrical Engineering, September 1995, Thessaloniki, Greece, pp. 339-344.

34) Simulation of induction motor using EMTP Faiz, J., E. Shafagh and S. Esmaeeli Proceedings of 7th International Power Electronics & Motion Control Conference, September 1996, Budapest, Hungary, pp. 387-391.

35) Sensitivity studies for an induction motor steady-state operation Faiz, J., M. Mosavian and P. PIllay Proceedings of 7th International Power Electronics & Motion Control Conference, September 1996, Budapest, Hungary, pp. 331-335.

36) Transient torque in three phase induction motor Faiz, J., M. Abolghasemian and G. Shahgholian Proceedings of 7th International Power Electronics & Motion Control Conference, September 1996, Budapest, Hungary, pp. 78-82.

37) Steady state performance of three phase induction motors with different ratings connected to a single phase supply Faiz, J., Khandar, Gh. Proceedings of 7th International Power Electronics & Motion Control Conference, September 1996, Budapest, Hungary, pp. 460-464

38) Evaluation of pulsating torque of a single phase induction motor using rotating field theory. Faiz, J., Servatian, A. Proceedings of 7th International Power Electronics & Motion Control Conference, September 1996, Budapest, Hungary, pp. 465-468.

39) A fast boundary element method to electric field computation within the tank of power transformers Faiz, J. and M. Ojaghi Proceedings of 7th International Symposium of Electromagnetc Fields in Electrical Engineering, September 1997, Gdansk, Poland, pp. 235-240.

40) Hysteresis loop modelling techniques and core loss estimation of magnetic cores Faiz, J. and M. B. B. Sharifian Proceedings of 7th International Symposium of Electromagnetic Fields in Electrical Engineering, September 1997, Gdansk, Poland, pp. 398-403.

41) Design criterion for a capacitor controlled single-phase induction motor Faiz, J. and Servatian, A. Proceedings of the 8th International Power Electronics & Motion Control Conference, September 1998. Prague, Czech Republic, pp. 2.107-2.109

42) Effects af airgap dimensions and magnetic flux density on the performance of variable reluctance step motor Faiz, J. and K. Banan. Proceedings of the 8th International Power Electronics & Motion Control Conference, September 1998. Prague, Czech Republic, pp. 5.1-5.6

43) Transient performance of cascade induction motors Faiz, J. and Sharifian, M.B.B. Proceedings of the 8th International Power Electronics & Motion Control Conference, September 1998. Prague, Czech Republic, pp. 3.97-3.102

44) Brushless dc motors control using artificial neural network Faiz, J. and Tonkaboni-pour, S.H. Proceedings of the 8th International Power Electronics & Motion Control Conference, September 1998.Prague, Czech Republic, pp. 3.103-3.107

45) Voltage dip of system on starting of large induction motors Faiz, J. and Sharifian, M.B.B. Proceedings of the 8th International Power Electronics & Motion Control Conference, September 1998. Prague, Czech Republic, pp. 2.125-2.129

46) Influence of optimally designed induction motors on the reduction of electrical energy consumptions Faiz, J. and Sharifian, M.B.B. Proceedings of 1st International, Conference on Energy Research & Development (ICER), November 1998, State of Kuwait, pp. 348-358.

47) A simple speed control technique and pulsating torque elimination method in a brushless dc motor Faiz, J., M.A. Azami and Moallem, M. Proceedings of 4th International Conference on Unconventional Electromechnical and Electrical Systems, St. Petersburg, Russia, June 21-24, 1999, pp. 339-344.

48) Study of maximum permissible slip for synchronous motor based on actual stator current Faiz, J. and Pillay, P. Proceedings of 4th International Conference on Unconventional Electromechanical and Electrical Systems, St. Petersburg, Russia, June 21-24, 1999, pp. 336-350.

49) The switched reluctance motor drive for distributed generation Humiston, T, Pillay, P. and Faiz, J. Proceedings of 5th Africon Conference in Africa, 28 September-10 October 1999, Cape Town, South Africa, Vol. 2, pp.....

50) Fast response solid-state on load transformers tap-changer Faiz, J. and Javidnia, H. 8th International Conference on Power Electronics and Variable Speed Drives, 18-19 September 2000, London, UK, pp. 355-359.

51) Minimization of current harmonics of DTC controller using a suitable switching pattern Faiz Jawad, Sharifian, Mohammad B. B. and Fedak Viliam 9th International Conference on Power Electronics and Motion Control, EPE-PEMC 2000, Kosice, Slovak, September 2000, Vol. 3, pp. 161-166.

52) EMTP base simulation of reclosing transients in induction motors Jawad Faiz and M. H. Abbas-zadeh 4th International Symposium on Advanced Electromechanical Motion Systems 19-20 June 2001, Bologna, Italy, Vol. 1, pp. 53-57.

53) Optimum design of permanent-magnet motor for electric vehicle Jawad Faiz, M. Ghaneei and M. Ojaghi 4th International Symposium on Advanced Electromechanical Motion Systems 19-20 June 2001, Bologna, Italy, Vol. 1, pp. 293-298.

54) Optimal design of brushless permanent magnet motor for electric vehicle Jawad Faiz Second International Conference on Energy Research & Development (ICERD-2), April 8-10, 2002, State of Kuwait, Vol. II, pp. 551-562.

55) Controllable output voltage for wind-driven self-excited induction generator Jawad Faiz Second International Conference on Energy Research & Development (ICERD-2), April 8-10, 2002, State of Kuwait, Vol. I.

56) Comparative study of application of fuzzy-logic field oriented and direct torque control techniques for induction motors control Jawad Faiz, S.H. Hosseini, G. Ahrabian, M.B.B. Sharifian and Y. Sabri First International Conference on Technical & Physical Problems in Power Engineering, 23-25 April 2002, Baku, Azerbaijan , pp. 99-107.

57) Optimal design and control of induction motor for electric vehicle-Part 1 Design optimization and steady-state analysis Jawad Faiz and M.B.B. Sharifian First International Conference on Technical & Physical Problems in Power Engineering, 23-25 April 2002, Baku, Azerbaijan , pp. 134-141.

58) Optimal design and control of induction motor for electric vehicle-Part 2 Dynamic Analysis Jawad Faiz and M.B.B. Sharifian First International Conference on Technical & Physical Problems in Power Engineering, 23-25 April 2002, Baku, Azerbaijan , pp. 152-159.

59) Design and performance prediction of a low-power single-phase switched reluctance motor Jawad Faiz 7th International Conference on Modeling and Simulation of electric Machines, Converters and Systems (ELECTRIMACS2002), 18-21 August 2002, Montreal, Canada..

60) Torque controller for a BLDC motor with non-sinusoidal back-emf waveform Jawad Faiz and B. Rezaei_Alam 7th International Conference on Modeling and Simulation of electric Machines, Converters and Systems (ELECTRIMACS2002), 18-21 August 2002, Montreal, Canada.

61) Transient performance of a salient-pole synchronous generator using phase-domain model Jawad Faiz and A. Rezaei-Zare 7th International Conference on Modeling and Simulation of electric Machines, Converters and Systems (ELECTRIMACS2002), 18-21 August 2002, Montreal, Canada.

62) Voltage and speed domains for an electric vehicle optimum designed three-phase induction motor Jawad Faiz and M. Ghaneei International Conference on Renewable Energy and Power Quality, 9-12 April 2003, Vigo, Spain.

63) Design of self-excited linear induction generator By: B. Rezaee-Alam, Jawad Faiz and P. Famouri Published in: 4th International Symposium on Linear Drives for Industry Applications, LDIA 2003, 8-10 September 2003, Birmingham, UK, pp. 485-488.

64) Sizing of switched reluctance machine for starter/alternator of hybrid electric vehicles By: J. Faiz and K. Moayed-zadeh Published in: 6th International Power Engineering Conference, IPEC2003, 27-29 November 2003, Singapore, pp. 453-458.

65) Effect of complex voltage unbalance factor on the derating of a three-phase induction motor By: J. Faiz and H. Ebrahimpour Published in: 6th International Power Engineering Conference, IPEC2003, 27-29 November 2003, Singapore, pp. 1051-1055.

66) Expansion of speed range of open-loop controlled step motors By: J. Faiz and M. Gandomkar Published in: 6th International Power Engineering Conference, IPEC2003, 27-29 November 2003, Singapore, pp. 1056-1060.

67) Derating of distribution transformers for non-sinusoidal load currents using finite element method By: M.B.B. Shafifian, J. Faiz, S.A. Fakheri and A. Zraatparvar Published in: 10th International Conference on Electronics, Circuits and Systems, Dec. 14-17, Sharjah, United Arab Emirates, pp. 754-757.

68) Slot fringing effect on the magnetic characteristics of the elwctrical machines By: M.B.B. Shafifian, K. Shaarbafi, J. Faiz, M.R. Feyzi 2004

69) Analytical core loss model for the switched reluctance motor with experimental verification By: Jawad Faiz, B. Ganji, P. Pillay and C. Yicheng, Published in: The 9th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM04, May 20-21, 2004, Brasov, Romania, pp. 47-52.

70) Influence of design parameters on cogging torque in PMSM using analytical model By: Jawad Faiz and M. Ahmadi Published in: The 9th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM04, May 20-21, 2004, Brasov, Romania, pp. 97-101.

71) Losses in switched eluctance generators By: Jawad Faiz and Reza Fazai Published in: The 2nd International Conference on Technical and Physical Problems in Power Engineering, 6-8 September 2004, Tabriz, Iran, pp. 51-56.

72) Remedial strategies for open-circuit faults in winding and transistors in permanent magnet BLDC motor By: Jawad Faiz and M. Ahmadi Published in: The 2nd International Conference on Technical and Physical Problems in Power Engineering, 6-8 September 2004, Tabriz, Iran, pp. 88-93.

73) Derating od a distribution transformer for non-linear loads By: M. B. B. Sharifian and Jawad Faiz Published in: The 2nd International Conference on Technical and Physical Problems in Power Engineering, 6-8 September 2004, Tabriz, Iran, pp. 75-80.

74) Comparative study of different torque control techniques applied to synchronous permanent magnet motors By: N. Taghizadegan, J. Faiz, M. B. B. Sharifian and S. H. Mohseni-Zonozi By: M. B. B. Sharifian and Jawad Faiz Published in: The 12th International Conference on Control and Automation, MED’04, June 6- 9, 2004, Kusadasi, Aydin, Turkey, (in CD)

75) Implementation of sensorless DTC technique for speed control of induction motor using a novel switching pattern By: M. B. B. Sharifian and Jawad Faiz Published in: The 5th Chinese International Conference on Electrical Machines, Xian, China, 2004, August 2004, pp. 379-383.

76) Different switching patterns in DTC of IM By: M. B. B. Sharifian and Jawad Faiz Published in: The 5th Chinese International Conference on Electrical Machines, Xian, China, 2004, August 2004, pp. 384-388.

77) Modeling and dynamic simulation of induction machine under mixed eccentricity conditions using winding function By: E. Sharifi-Ghazvini, J. Faiz, I. Tabatabaei-Ardekani, A. Shirani International Conference of Cigre, September 2004, Paris, France (in CD).

78) Fault diagnosis in permanent magnet brushless direct current motors By: Jawad Faiz and Majid Ahmadi 7th International Conference on Electrical Machines and Systems, November 2004, Jeju Island, Korea (in CD).

79) Performance simulation of high- and medium-speed single-sided linear induction motors By: Jawad Faiz and H. Jafari 7th International Conference on Electrical Machines and Systems, November 2004, Jeju Island, Korea (in CD).

80) Analysis and simulation of load-frequency control in steam turbine and parameters variation effects By: Jawad Faiz, Ghazanfar Shahgholian and Homayon Ghazizadeh 7th International Conference on Electrical Machines and Systems, November 2004, Jeju Island, Korea (in CD).

81) Effects of parameters variations in the frequency-load control system of a hydro-turbine By: Jawad Faiz and Ghazanfar Shahgholian 7th International Conference on Electrical Machines and Systems, November 2004, Jeju Island, Korea (in CD).

82) Harmonic reduction in pulse-width modulation inverter By: Jawad Faiz and Ghazanfar Shahgholian 7th International Conference on Electrical Machines and Systems, November 2004, Jeju Island, Korea (in CD).

83) Analysis and simulation of a single-phase UPS inverter with output multiple filter By: Jawad Faiz and Ghazanfar Shahgholian 7th International Conference on Electrical Machines and Systems, November 2004, Jeju Island, Korea (in CD).

84) Incipient fault tolerance for open-phase and power switch disconnection in permanent magnet brushless direct current motor. By. J. Faiz and M. Ahmadi 3rd International Conference on Electrical and Power Engineerin, October 7-8, Lasi, Romania, pp. 997-1002.

85) A new technique for pulse-width-modulation using direct torque control of a virtual motor By: Jawad Faiz and A.H. Pouramini IEEE International Electric Machines and Drives Conference, May 15-18 2005, San Antonio, Texas, USA, pp. 962-966. (in CD).

86) Harmonic balance hybrid finite element-boundary element method including time periodic movement By: Behrooz Rezaeealam, Sotoshi Yamada and Jawad Faiz The Fifth International Symposium on Linear Drives for Industry applications, September 25- 28, 2004, Kobe-Awaji, Japan, pp. 45-48.

87) Direct Force Control of Linear Permanent Magnet Synchronous Motors By: Jawad Faiz, Iman Tabatabaei-Ardakani and S. H. Mohseni-Zoonozi The Fifth International Symposium on Linear Drives for Industry applications, September 25- 28, 2004, Kobe-Awaji, Japan, pp. 124-127.

88) Analysis of reciprocating self-excited induction generator using harmonic balance finite element method By: Jawad Faiz, Behrooz Rezaeealam and Sotoshi Yamada The Fifth International Symposium on Linear Drives for Industry applications, September 25- 28, 2004, Kobe-Awaji, Japan, pp. 45-48.

89) Analysis of High-Speed Linear Induction Motors with Slotted Secondary By: Mehran Mirzayee, Mojtaba Mirsalim, Jawad Faiz and Mojtaba Ghodsi The Fifth International Symposium on Linear Drives for Industry applications, September 25- 28, 2004, Kobe-Awaji, Japan, pp. 164-167.

90) Precise Derating of Three-phase Induction Motors with Unbalanced Voltages By: Jawad Faiz and H. Ebrahimpour 2005 Industry applications Conference, Fortieth IEEE/IAS Annual Meeting, 2-5 October 2005, Kawloon, Hong Kong, pp. (also in CD).

91) A New Developed Pulse Width Modulation for Supplying Induction Motors By: Jawad Faiz and A. H. Pouramini The Eighth International Conference on Electrical Machines and Systems, September 27-29, Nanjing, P.R. China, pp. 2380-2383.

92) Design and Implementation of a Solid-state Controller for Regulation of Output Voltage of a Wind-Driven Self-Excited Three-Phase Squirrel-cage Induction Generator By: Jawad Faiz The Eighth International Conference on Electrical Machines and Systems, September 27-29, Nanjing, P.R. China, pp. 2384-2388.

93) Simulation of Induction Motor using Small Pertutbation around Operating Point of Motor By: Jawad Faiz and Ghazanfar Shahgholian The Eighth International Conference on Electrical Machines and Systems, September 27-29, Nanjing, P.R. China, pp. 2395-2400.

94) A review of the performance prediction and design techniques for switched reluctance motors, Faiz, J. Journal of Electrical and Electronics Engineering, Australia, IE Aust. & IREE Aust. Vol. 12, No. 3, Sept. 1992, pp. 258-266.

95) Heat distribution and thermal calculations for a switched reluctance motor, Faiz, J. and A. Dadgari Journal of Electrical and Electronics Engineering, Australia, IE Aust. & IREE Aust. Vol. 12, No. 4, December 1992, pp. 349-361.

96) CAD of single-phase induction motors based on a new geometrical approach Faiz, J. and Honarparvar, Sh. Journal of Engineering, Islamic Republic of Iran, Vol. 5, No. 3&4, Nov. 1992, pp. 81-89.

97) Aspects of design optimisation for switched reluctance motors Faiz, J. and Finch, J.W IEEE Transactions on Energy Conversion, Vol. 8, No. 4,December 1993, pp. 704-713.

98) Design computations and performance characteristics prediction for multiple-tooth switched reluctance motors Faiz, J. and Finch, J.W. International Journal of Computers and Electrical Engineering, Vol. 20, No. 3, May 1994. pp. 243-258.

99) Teaching Aids for Electrical Machines Laboratory Faiz, J. and Ghasemzadeh, S. Journal of Computer Applications in Engineering Education, Vol. 1, No. 5, pp. 455-461. (John Wiley & Sons),

100) Simulation of Induction Motor Including Mechnaical Losses and Saturation Faiz Jawad, Sharifian,M. B., Madadi H. and Shi Liming Journal of Advanced Technology of Electrical Engineering and Energy (in Chinese), No. 1, 1994, pp. 55-61.

101) Core losses estimation in a multiple teeth per stator switched reluctance motor Jawad Faiz and M. B. B. Sharifian IEEE Transactions on Magnetics, Vol. 30, No. 2, March 1994. pp. 189-195.

102) Three phase induction motor simulation for teaching purposes Jawad Faiz and M. B. B. Sharifian Journal of Computer Applications in Engineering Education Vol. 2, No. 1, 1994, pp.71-79.

103) A design package for single-tooth per stator pole switched reluctance motors Faiz, J. and Finch, J.W. Journal of Engineering, Islamic Republic of Iran, Vol. 7, No. 4, Nov. 1994, pp.197-206.

104) A modification factor for sizing equation of induction motor Faiz, J. and Honarparvar, Sh. Journal of Engineering, Islamic Republic of Iran, Vol. 7, No. 3, August 1994, pp. 181-184.

105) A software tool for electromagnetic analysis of power system elements using finite difference method Jawad Faiz and Ali Dadgari Journal of Computer Applications in Engineering Education, Vol. 2, No. 4, 1994, pp. 245-256.

106) Comparison of two optimisation techniques for design of three phase induction motor using three different objective function Faiz, J. and Sharifian M.B.B. European Transactions on Electrical Power Engineering (ETEP), Vol. 5, No. 3, May/June 1995, pp. 199-206.

107) Design of three phase self-excited induction motor Jawad Faiz, A. Dadgari, S. Horning and A. Keyhani IEEE Transactions on Energy Conversion, Vol. 10, No. 3, September 1995, pp. 516-523.

108) Optimum design of a three phase squirrel-cage induction motor based on efficiency maximization Jawad Faiz and M. B. B. Sharifian International Journal of Computers and Electrical Engineering, Vol. 21, No. 5, September 1995, pp. 367-373.

109) A novel multiple teeth per stator pole switched reluctance motor and their comparison Jawad Faiz, J. W. Finch, H. B. B. Metwally Electric Power Systems Research, Vol. EPSO34/3, 1995, pp. 197-203.

110) Dynamic analysis of induction motors with saturable inductances Jawad Faiz and A. R. Seifi Electric Power Systems Research, Vol. EPSO34/3, 1995, pp. 205-210.

111) Design and performance Computations for four tooth and higher tooth-per-stator pole switched reluctance motors Jawad Faiz Journal of The Institution of Engineers (India), Electrical Engineering Division, Vol. 76, November 1995, pp. 137-144.

112) Simulation and analysis of brushless dc motor drives using hysteresis, ramp comparison and predictive current control techniques Jawad Faiz, M. R. Azizian and M. Aboulghasmian-Azami International Journal of Simulation and Practice,Vol, No. 3, January 1996, pp. 347-363.

113) Simulation of a variable reluctance step motor for sinusoidal and step excitations Jawad Faiz and R. Iranpour International Journal of Engineering, Islamic Republic of Iran, Vol. 9, No. 2, May 1996, pp. 9- 20.

114) Analysis of shaded pole induction motors considering asymmetrical flux distribution and saturation effects Jawad Faiz, M.R. Feyzi and A. Abbasi International Journal of Engineering, Islamic Republic of Iran, Vol. 9, No. 4, November 1996, pp. 189-200.

115) Transient Behavior of Optimum Designed Induction Motors Jawad Faiz and M. B. B. Sharifian European Transactions on Electrical Power Engineering ETEP Vol. 7, No. 6, Nov./Dec. 1997, pp. 415-420.

116) Lumped complete equivalent circuit of a coreless high frequency transformer Jawad Faiz, B. abed-Ashtiani and M. R. at IEEE Transaction on Magnetics, Vol. 33, No. 1, January 1997, pp. 703-707.

117) Aspect of design optimization for multiple teeth per stator pole switched reluctance motors Jawad Faiz and J. W. Finch Electric Power Systems Research, Vol. 42, No. 1, July 1997, pp. 77-86.

118) Trend of optimization in optimum design of a three phase squirrel-cage induction motor using three different objective functions Jawad Faiz and M. B. B. Sharifian Journal of The Institution of Engineers (India), Electrical Engineering Division, Vol. 77, February 1997, pp. 194-201.

119) Closed-loop control stability for permanent magnet synchronous motor J. Faiz, M. A. Azami, A. Keyhani and A. Proca International Journal of Electrical Power and Energy Systems, Vol. 19, No. 5, 1997, pp, 331- 337.

120) Thermal Model for a Switched Reluctance Motor of TEFC During Steady-State and Transient Operation Jawad Faiz, R. Iranpour and P. Pillay Journal of Electric Machines and Power Systems, Vol. 26, No. 1, January 1998, pp.77-92.

121) A fast boundary element method to electric field computation within the tank of power transformers Faiz, J. and M. Ojaghi The International Journal for Computation and Mathematics in Electrical and Electronic Engineering (COMPEL), Vol. 17, No. 1/2/3, 1998, pp. 69-77.

122) Modeling of multiple tooth per stator pole switched reluctance motors and their torque ripples control, Jawad Faiz, Y. Ashkvari and E. Hassan-zadeh Journal of The Institution of Engineers (India), Electrical Engineering Division, Vol. 79, May 1998, pp. 50-56.

123) Optimization of an electronically controlled capacitor for a single-phase induction motor Jawad Faiz, A. Servatian and P. Pillay Journal of Electric Machines and Power Systems, Vol. 26, No. 10, December 1998, pp. 1067-1 1079.

124) Automatic Finite-Element Mesh Generation Using Auto-CAD Faiz, J. and E. Shafagh IEEE Transactions on Education, Vol. 41,. No. 4, Nov. 1998, pp. 325-330.

125) PSPICE simulation of single-phase induction motors Faiz, J., M .Ojaghi and A. Keyhani IEEE Transactions on Energy Conversion, Vol. 14,. No. 1, March 1999, pp. 86-92.

126) Performance analysis of fast reclosing transient in induction motors Faiz, J. M. Ghaneei and A. Keyhani IEEE Transactions on Energy Conversion, Vol. 14,. No. 1, March 1999, pp. 101-107.

127) A Review of the Control Techniques for Brushless Direct Current Motors Jawad Faiz and M. Abolghasemian-Azami International Journal of Engineering, Islamic Republic of Iran, Vol. 12, No. 1, February 1999, pp. 49-67.

128) Direct Torque Control of Induction Motors for Electric Propulsion Systems Faiz, J., Hossieni, S. H., Ghaneei, M., Keyhani A. and Proca, A. Electric Power Systems Research, Vol. 51, No. 2, August 5 1999, pp. 95-102.

129) Influence of core losses on analysis of self-excited induction generator Faiz, J. Journal of The Institution of Engineers (India), Electrical Engineering Division, Vol. 80, Nov. 1 1999, pp. 115-117.

130) Influence of operation conditions upon the dynamic steady-state performance of switched reluctance motor Faiz, J. and Shafagh, E. International Journal of Engineering, Islamic Republic of Iran, Vol. 12, No. 4, Nov. 1999, pp. 219-232.

131) Two-dimensional magnetic field analysis of internal-rotor permanent-magnet motors Jawad Faiz and H. Jafari IEEE Transaction on Magnetics, Vol. 35, No. 5, September 1999, pp. 4232-4237.

132) Magnetic permeance of doubly-salient airgap geometry with finite slot depth and tapered teeth Faiz, J. and J. W. Finch The International Journal for Computation and Mathematics in Electrical and Electronic Engineering (COMPEL), Vol. 19, No. 1, 2000, pp. 70-85.

133) Effect of slot depth on the permeance of aligned teeth in a doubly-salient rectilinear toothed structure Faiz, J. and J. W. Finch The International Journal for Computation and Mathematics in Electrical and Electronic Engineering (COMPEL), Vol. 19, No. 1, 2000, pp. 95-105. .

134) Novel techniques for treating singularity problems in the boundary element method applied to electric field evaluation within the tank of a power transformer Faiz, J. and M. Ojaghi IEEE Trans.on Power Delivery, Vol. 15, No. 2, April 2000, pp. 592-598.

135) A Simple speed control technique and pulsating torque elimination method in a brushless dc motor Jawad Faiz, M. A. Azami and M. Moallem International Journal of Engineering, Vol. 13, No. 2, May 2000, pp.19-26.

136) Effects of airgap dimensions and magnetic flux density on performance of variable reluctance step motor Faiz, J. and Abassi, K. B. A. Journal of The Institution of Engineers (India), Vol. 81, September 2000, pp. 54-61.

137) Investigation of a new method of controlling a brushless dc motors including the inverter non- linearities, Faiz, J., Aboulghasemian-Azami, M. and Moallem, M., Journal of Electrical and Electronics Engineering, Australia, IE Aust. & IREE Aust. Vol. 20, No. 2, pp. 111-118.

138) Performance comparison of optimally designed induction motors with aluminum and copper squirrel-cages Faiz, J., Sharifian, M. B. B., Keyhani, A. and Proca, A. Journal of Electric Machines and Power Systems, Vol. 28, No. 12, Dec. 2000, pp. 1195-1207.

139) Optimum design for electric vehicle induction motor Faiz, J., Ghaneei, M., Keyhani, A. and Proca, A. Journal of Electric Machines and Power Systems, Vol. 28, No. 12, Dec. 2000, pp. 1177-1195.

140) Accurate modeling of single-sided linear induction motor considers end effect and equivalent thickness Faiz, J. and Jafari, H. IEEE Transaction on Magnetics, Vol. 36, No. 5, September 2000, pp. 3785-3790.

141) Optimal design of three phase induction motors and their comparison with typical industrial motor Faiz J. And Sharifian, M.B.B. International Journal of Computers and Electrical Engineering, Vol. 27, No. 2, March 2001, pp. 133-144.

142) Design of current and speed controllers for slip energy recovery induction motor drive using root locus techniques Faiz, J., Barati, H. and Akpinar, E. European Transactions on Electrical Power Engineering (ETEP), Vol. 11, No. 1, Jan./Feb. 2001, pp. 39-48.

143) Harmonic analysis and performance improvement of slip energy recovery induction drives Faiz, J., Barati, H. and Akpinar, E IEEE Trans. On Power Electronics, Vol. 16, No. 3, May 2001, pp 410-417.

144) Different techniques for real time estimation of an induction motor rotor resistance in sensorless direct torque control for electric vehicle. Faiz, J., Sharifian, M. B. B. IEEE Trans. On Energy Conversion, Vol. 16, No. 1, March 2001, pp 104-109..

145) Hysteresis loop modelling techniques and core loss estimation of magnetic cores Faiz, J. and M. B. B. Sharifian The International Journal for Computation and Mathematics in Electrical and Electronic Engineering (COMPEL), Vol. 20, No. 4, 2001, pp. 988-1001

146) Comparison of different switching pattern in direct torque control technique Jawad Faiz and M. B. B. Sharifian Electric Power Systems Research, Vol. 60, No. 2, December 2001, pp. 63-75.

147) Instructive review of computation of electric field using different numerical techniques Faiz, J. and Ojaghi, M. The International Journal of Engineering Education, Vol. 18, No. 3, 2002, pp. 344-356.

148) Pspice-based dynamic analysis of a multiple-teeth per stator pole switched reluctance motor with multiple teeth per stator pole J. Faiz, J. Raddadi and J.W. Finch IEEE Trans. on Magnetics, Vol. 38, No. 4, July 2002, pp. 1780-1788.

149) Torque ripple minimization in switched reluctance motor optimal commutation strategy using a novel reference torque Faiz, J. and Gh. Soltani-Khosroshahi Journal of Electric Power Components and Systems, Vol. 30, No. 7, July 2002, pp.769-782.

150) Lumped equivalent circuit of three-phase squirrel-cage induction motors using two-dimensional finite-elements techniques J. Faiz, M.B. Sharifian, M.R. Feyzi and K. Shaarbaf IEEE Trans. on Energy Conversion, Vol. , No. 3, September 2002, pp. 363-367.

151) Optimal configurations for taps of windings and power electronics switches in electronic tap- changers of power transformers J. Faiz, A. Siahkolah Proc. IEE, Pt. C., Vol. 149, No.5, September 2002, pp. 517-524. .

152) Extension of winding function theory for nonuniform airgap of electric machinery J. Faiz and I. Tabatabaei IEEE Trans. on Magnetics, Vol. 38, No. 6, November 2002, pp. 3654-3657.

153) Pspice simulation of a capacitor-start and triac-start single-phase induction motor during stedy- state and transient operations and its experimental verification J. Faiz, A. Jafarian and M. Neekzad International Journal of Energy Conversion and Management, Jan./Feb. 2003. 44, pp. 479-495

154) New solid-state on-load tap-changers topology for distribution transformers J. Faiz, and B. Siahkolah IEEE Trans. on Power Delivery, Vol. 18, No. 1, January 2003, pp. 136-141.

155) Sensorless direct torque control of induction motor used in electric vehicles J. Faiz, M.B. Sharifian, A. Keyhani and A. B. Proca IEEE Trans. on Energy Conversion, Vol. 18, No. 1, March 2003, pp. 1-10.

156) A novel technique for estimation and control of stator flux of a salient-pole PMSM in DTC method based on MTPF J. Faiz and S.H. Mohseni-zonoozi IEEE Trans. on Industrial Electronics, Vol. 50, No. 2, April 2003, pp. 262-271.

157) A fast method for calculation of transformers leakage reactance using energy method A. Naderian Jahromi, Jawad Faiz and Hossien Mohseni International Journal of Engineering, Islamic Republic of Iran, Vol. 16, No. 1, April 2003, pp. 41-48.

158) An evaluation of inductances of a squiiel-cage induction motor under mixed eccentric conditions By: Jawad Faiz, I. Tabatabaei Ardekani and Hamid.A. Toliyat IEEE Trans. on Energy Conversion, Vol. 18, No. 2, June 2003, pp. 252-258.

159) Design of a high power brushless linear variable transformer By: A. Rezaei, J. Faiz, and H. Mohseni IEEE Trans. on Power Delivery, Vol. 18, No. 3, July 2003, pp. 809-814.

160) A new power electronic converter for switched reluctance motors By: J. Faiz, M.R. Salehi and S.H. Hosseini European Transactions on Elecrtical Power, Vol. 13, No. 5, September/October 2003, pp. 301- 306

161) Transient analysis of switched reluctance motors By: J. Faiz, R. Iranpour, A. Keyhani and H. Gunawan Iranian Journal of Sciences and Technology, Transaction B: Engineering, Vol. 27, No. B4, 2003, pp. 751-762.2004

162) Modeling and simulation of a salient-pole synchronous generator with dynamic eccentricity using modified winding function By: I. Tabatabaei-Ardekani, J. Faiz, H. Lesani and M.T. Nabavi-Razavi IEEE Trans. on Magnetics, Vol. 40, No. 3, May 2004, pp. 1550-1555.

163) Derating of distribution transformers for non-sinusoidal load currents using FEM By: J. Faiz, M.B.B. Sharifian, S.A. Fakheri and E. Sabet-Marzooghi Iranian Journal of Sciences and Technology, Vol. 28, No. B3, June 2004, pp. 315-322.

164) Effect of solid-state on-load distribution tap-changer on power quality enhancement By: J. Faiz and B. Siahkolah International Journal of Engineering, I.R.Iran, Vol. 17, July 2004, pp. 143-156.

165) Design and test of an integrated electronically controlled capacitor for integral and fractional- horse power single-phase induction motor By: Jawad Faiz, F. Kasebi and P. Pillay International Journal of Energy Conversion and Management, Nov. 2004 Vol. 45, pp. 2989- 3001.

166) A Precise electromagnetic modeling and performance analysis of a three-phase squirrel-cage induction motor under mixed eccentricity condition By: Jawad Faiz, Iman Tabatabaei and E. Sharifi-Ghazvini International Journal of Electromagnetics, Vol. 24, No. 6, August-September 2004,pp. 471-489.

167) Influence of unbalanced voltage on the steady-state performance of a three-phase squirrel-cage induction motor By: J. Faiz, H. Ebrahimpour and P. Pillay IEEE Trans. on Energy Conversion, Vol. 19, No. 4, December 2004, pp. 657-662.

168) Adaptive position control of PMSM drive using neural networks By: J. Faiz, A.R. Ghafari and P. Pillay Journal of Iranian Association of Electrical and Electronics Engineers, Vol. 1, No. 2, fall 2004, pp. 21-26. 2005

169) Direct torque control application on permanent-magnet synchronous motors- A review By: Jawad Faiz and H. Mooseni-Zoonozi Journal of Electromotion, Mdiamira Science Publisher, Romania,Vol. 12, May 2005, pp. 44-

170) Development of analytical models of SRM in two-phase excitation mode-Extended Miller Model By: M. Farshad, J. Faiz and C. Lucas IEEE Transactions on Magnetics, Vol. 41, No. 6, June 2005, pp. 2145-2155.

171) Design of switched reluctance machine for starter/generator of hybrid electric vehicle By: Jawad Faiz and K. Moayed-Zadeh Journal of Electric Power Systems Research, Vol. 75, Issues 2-3, August 2005, pp. 153-160.

172) Sag mitigation by an electronic tap-changer: specifications and comparisons with other custom power tools By: Jawad Faiz and B. Siahkolah IEE, Pt. C, September 2005, Vol. 152, No. 5, pp. 697-704.

173) Coupled FE/Boundary element analysis of reciprocating self-excited induction generator in harmonic domain By: J. Faiz, B. Rezaeealam and Yamada IEEE Transactions on Magnetics, Vol. 41, No. 11, November 2005, pp. 4250-4256. 2006

174) Influence of unbalanced voltage supply on efficiency of a three-phase squirrel-cage induction motor and economic analysis By: Jawad Faiz, H. Ebrahimpour and P. Pillay International Journal of Energy Conversion and Management, Vol. 47, No. 3, Feburary 2006, pp 289-302

175) Adaptive performance improvement of SRM with two-phase excitation By: J. Faiz, B. Rezaei-Alam and P. Pillay European Transactions on Electrical Power,(ETEP) Vol. 6, No. 1, January 2006, pp. 1-13.

176) Optimal design of induction motor for electric vehicle By: Jawad Faiz and M.B.B. Sharifian European Transactions on Electrical Power,(ETEP) Vol. 6, No. 1, January 2006, pp. 15-33.